Micro Flat Washers are created to DIN 125A standard and are predominantly used in conjunction with a bolt or nut, providing a smooth surface to distribute a load over a wider surface.
They are commonly referred to as ‘plain washers’ and are often used to provide more thickness to a fixing when needed.
Micro Flat Washers can also be used in applications where the hole is a larger diameter than the fixing – nut or bolt.
Available as standard in diameters ranging from M1 to M3, in A2 and A4 Stainless Steel, Steel and Brass. Other flat washer forms are available offering different thickness and outside diameters.
Non-standard sizes, materials and finishes are available to order as specials, including small volume manufacture, modifications and bespoke parts made to drawings. Minimum order quantities apply.
We supply a wide range of Washers here at Fastenright.
|Technical Data & Availability|
|Diameter (d1)||d2 (mm)||s (mm)||Material|
|M1 Flat Washers||3.2||0.3||Steel / Stainless / Brass|
|M1.2 Flat Washers||3.8||0.3||Steel / Stainless / Brass|
|M1.4 Flat Washers||3.8||0.3||Steel / Stainless / Brass|
|M1.6 Flat Washers||4.0||0.3||Steel / Stainless / Brass|
|M2 Flat Washers||5.0||0.3||Steel / Stainless / Brass|
|M2.3 Flat Washers||6.0||0.5||Steel / Stainless / Brass|
|M2.5 Flat Washers||6.0||0.5||Steel / Stainless / Brass|
|M2.6 Flat Washers||7.0||0.5||Steel / Stainless / Brass|
|M3 Flat Washers||7.0||0.5||Steel / Stainless / Brass|
|Size not listed? Please make an enquiry – we may be able to provide it.|