Plastic Slotted Set Screws Flat Point (DIN 551)

Plastic Slotted Set Screws, otherwise known as Plastic Slotted Grub Screws, host a Flat Point that can be used against a thin wall or soft material. They apply pressure with or against an opposing object to create a secure fixing.

These Plastic Slotted Grub Screws are made to DIN 551 standard or ISO 4766 but may not follow the strict tolerances relevant to metal parts, so should only be used as guidance.

The enclosed slotted drive differs from a standard slotted drive, requiring an appropriately sized slotted screwdriver or insert bit for installation and removal. They are typically designed for applications that require a threaded fastener that has no protruding head e.g. attaching a gear or pulley to a shaft.

Plastic Flat Point Slotted Set Screws to DIN 551 are manufactured from Nylon 66 (PA 66) as standard – offering good impact resistance, chemical resistance and electrical insulating properties.

Supplied in a White (natural) colour as standard, but can be dyed a number of different colours depending on your application or requirements.

Available in thread sizes from M3 to M12 as standard, with lengths ranging from 3mm to 80mm. Minimum order quantities apply.

Non-standard sizes, materials and colours are available to order as specials, including small volume manufacture, modifications and custom parts made to drawings.

Plastic Socket Set Screws Flat Point (DIN 913) are also available at Fastenright.

3mm
4mm
5mm
6mm
8mm
10mm
12mm
13mm
16mm
20mm
25mm
30mm
35mm
40mm
45mm
50mm
55mm
60mm
70mm
80mm

= Nylon 66 Size not listed? Please make an enquiry – we may be able to provide it.