4 Split Leg, or 4 Split Body Rivet Nuts are available in diameters from M6 to M10 to suit various grip ranges, with M4 and M5 diameters available to special order.
They are ideal for use with plastic materials, thin sheet materials and hollow sections where high pull-out forces are required.
When they are installed using manual or pneumatic tools, the 4 split legs are pulled together, expanding outwards behind the surface material to provide a large load-bearing area.
Standard materials include zinc plated steel, A2 stainless steel and A4 stainless steel. Aluminium, amongst other special materials, is available to order as a special.
Please contact us with your requirements to further your enquiry.
Rivet Nut 4 Split Leg | ||||||
THREAD | Grip Range (GR) |
Hole Dia (D) | Max Body Dia | Head Dia (DK) |
Head Thickness (K) | Length (L) |
M6 | 0.5 – 7.1 | 10.0 – 10.2 |
9.8 |
16.4 | 1.6 | 27.4 |
M6 |
7.1 – 12.7 |
10.0 – 10.2 | 9.8 | 16.4 | 1.6 | 33.3 |
M8 |
0.5 – 7.1 | 12.7 – 12.9 | 12.6 | 19.6 | 1.7 | 31.3 |
M8 | 7.1 – 12.7 | 12.7 – 12.9 | 12.6 | 19.6 | 1.7 | 37.0 |
M10 | 0.5 – 7.1 | 15.1 – 15.3 | 14.9 | 22.7 | 2.4 | 33.7 |