IN08 Slotted Insert Nut for Soft Wood and Soft Plastics

IN08 Slotted Insert nuts are suitable for use in softwoods and can also be used in some kinds of soft plastics. They are RoHS-compliant and are manufactured to the highest standards. They have full standardised internal threads which make automatic insertion very easy, although installation can also be performed manually or by using a semi-automated process.

Manufactured in steel (self colour and zinc plated), brass and stainless steel, they are available in standard sizes from 6mm to 25mm diameter and in lengths from 6mm to 30mm. The internal thread diameter is for screw sizes from M3 up to M16.

Note: An appropriately sized pilot hole should be made before insertion.

Available in a range of sizes – see stock chart below for full specifications. Non standard sizes available to order.

6	6	M 3	5.0
6.5	8	M 4	5.5
6.5	8	M 4	5.5
6.5	10	M 4	5.5
8	6	M 4	6.0
8	8	M 4	6.0
8	10	M 4	6.0	6.5 – 7.0
8	10	M 4	6.0
8	12	M 4	6.0
9	12	M 5	8.0
10	8	M 5	8.0 – 8.5
10	10	M 5	8.0 – 8.5
10	12	M 5	8.0 – 8.5	8.0 – 8.5
10	14	M 5	8.0 – 8.5
12	8	M 6	10.0 – 10.5
12	10	M 6	10.0 – 10.5
12	11	M 6	10.0 – 10.5
12	12	M 6	10.0 – 10.5	10.0 – 10.5
12	14	M 6	10.0 – 10.5
12	15	M 6	10.0 – 10.5	10.0 – 10.5
12	18	M 6	10.0 – 10.5
12	20	M 6	10.0 – 10.5
12	24	M 6	10.0 – 10.5
14	12	M 8	12.0 – 12.5
14	14	M 8	12.0 – 12.5
14	15	M 8	12.0 – 12.5	12.0 – 12.5
14	18	M 8	12.0 – 12.5
16	18	M 8	13.0 – 13.5	14.0 – 14.5
16	23	M 8	13.0 – 13.5
16	30	M 8	13.0 – 13.5
16	40	M 8	13.0 – 13.5
16	18	M 10		14.0 – 14.5
18.5	15	M 10	15.5 – 16.0
18.5	20	M 10	15.5 – 16.0
18.5	25	M 10	15.5 – 16.0
18.5	30	M 10	15.5 – 16.0
22	20	M 12	19.0
22	25	M 12		18.5 – 19.0
22	30	M 12	19.0	18.5 – 19.0
22	25	M 14	19.0
22	30	M 14	19.0
25	25	M 16		21.0 – 21.5
25	30	M 16		21.0 – 21.5

= AVAILABLE