IN09 Insert nuts are thin walled slotted inserts This type of insert is designed primarily for use in all kinds of softwoods and composite boards although they can also be appropriate for use in certain types of soft plastics. The high quality zinc plated inserts meet RoHS standards and are corrosion resistant. A pilot hole slightly larger than the diameter of the insert should be drilled first and then insertion can be achieved manually or by using a semi-automated or fully automated process.
These insert nuts are available in steel (zinc and self colour) or brass, with diameters available from 8mm to 16mm and in lengths from 8mm to 36mm. They have standardised internal thread diameters ranging from M5-M10. See stock chart below for full specifications.
Non standard sizes available to order.
IN09 Slotted Insert Nut for Soft Wood | ||||||
D | L | d | Pilot Hole | Steel plain | Steel zinc plated | Brass plain |
8 | 8 | M 5 | 6.5 – 7.0 | |||
8 | 10 | M 5 | 6.5 – 7.0 | |||
8 | 12 | M 5 | 6.5 – 7.0 | |||
8 | 15 | M 5 | 6.5 – 7.0 | |||
9.3 | 12 | M 6 | 7.8 – 8.3 | |||
9.3 | 17 | M 6 | 7.8 – 8.3 | |||
9.3 | 20 | M 6 | 7.8 – 8.3 | |||
10 | 10 | M 6 | 8.0 – 8.5 | |||
10 | 12 | M 6 | 8.0 – 8.5 | |||
10 | 14 | M 6 | 8.0 – 8.5 | |||
10 | 15 | M 6 | 8.0 – 8.5 | |||
10 | 17 | M 6 | 8.0 – 8.5 | |||
10 | 18 | M 6 | 8.0 – 8.5 | |||
10 | 20 | M 6 | 8.0 – 8.5 | |||
12 | 10 | M 8 | 10.0 – 10.5 | |||
12 | 12 | M 8 | 10.0 – 10.5 | |||
14 | 10 | M 10 x 1 | 12.0 – 12.5 | |||
14 | 15 | M 10 | 12.0 – 12.5 | |||
14 | 18 | M 10 | 12.0 – 12.5 | |||
14 | 20 | M 10 | 12.0 – 12.5 | |||
14 | 23 | M 10 | 12.0 – 12.5 | |||
16 | 16 | M 10 | 12.5 – 13.5 | |||
16 | 18 | M 10 | 12.5 – 13.5 | |||
16 | 23 | M 10 | 12.5 – 13.5 | |||
16 | 36 | M 10 | 12.5 – 13.5 |
|