This grade 8.8 threaded bar with a hot-dip galvanised surface finish is corrosion-resistant and hosts a number of other positives. The hot-dip galvanising of the threaded bar can elongate the life of the product dependant on industry of use, as well as providing a competitive initial cost and a low lifetime cost due to extended maintenance intervals.
There is also three-way protection due to the galvanising, meaning that the coating weathers at a very slow rate, corrodes preferentially to provide cathodic protection and prevents rust which can undermine the coating on the allthread.
Available from a thread size of M10 and above, and in lengths ranging from one to three metres, we generally stock the many thread sizes and lengths listed.
Non-standard sizes and cut lengths of galvanised threaded bar are available to order, with short lead times.
For more information, please contact us.
Threaded rods DIN 976 – surface finish: hot-dip galvanized | |||
Grade 8.8 | 1000 mm | 2000 mm | 3000 mm |
M10 | Call Us | Call Us | |
M12 | |||
M16 | |||
M20 | |||
M24 | |||
M27 | Call Us | Call Us | |
M30 | |||
M33 | Call Us | Call Us | |
M36 | |||
M39 | |||
M42 | Call Us | ||
M45 | Call Us | Call Us | |
M48 | Call Us | ||
M56 | Call Us | Call Us | Call Us |