Type I Insert Nuts for Wood have external teeth or barbs which provide a strong, permanent thread for wood and wood-based materials, providing substantial holding power even when torqued laterally.
The coarse external barb pattern ensures a maximum holding power and helps to simplify installation by knocking the insert into the base material.
This insert nut has a blind – or closed – round surface flange which is pressed or hammered into position through a pre-drilled pilot hole. Once in position, a ‘joint connector bolt‘ can be inserted from the adjacent side and screwed into position – mating the insert nut to provide a strong clamping force, increasing its holding power and producing an aesthetically pleasing finished appearance.
Available from stock in zinc alloy ranging in sizes from M4 to M8 in various lengths and finishes. Specials are available to order.
Please contact us with your requirements to further your enquiry.
Insert Nut For Wood Type I – Knock In Insert Type I |
|||||
Thread Diameter | Length (mm) |
Flange Dia D1 (mm) | T Head Thickness(mm) | Pilot Hole (mm) | Pitch (mm) |
M4 | 10.0 | 11.0 | 2.5 | 6.0 to 6.4 | 0.70 |
M4 | 12.5 | 11.0 | 2.5 | 6.0 to 6.4 | 0.70 |
M5 | 11.0 | 17.0 | 2.0 | – | 0.80 |
M6 | 11.5 | 17.0 | 2.0 | 8.3 to 8.7 | 1.00 |
M6 |
13.0 | 17.0 | 2.0 | 8.3 to 8.7 | 1.00 |
M6 | 17.0 | 17.0 | 2.0 | 8.3 to 8.7 | 1.00 |
M6 | 18.0 | 17.0 | 2.0 | 8.3 to 8.7 | 1.00 |
M6 | 20.0 | 17.0 | 2.0 | 8.3 to 8.7 | 1.00 |
M8 | 15.5 | 17.0 | 2.0 | 9.5 to 10.5 | 1.25 |
M8 | 17.5 | 17.0 | 2.0 | 9.5 to 10.5 | 1.25 |