Shakeproof Washers are often used with screws and nuts within electrical connectivity, with the teeth shaped into a twisted form.
The teeth bite into the bolt head or nut, and the other edge bites into the mating surface. The teeth on the internal diameter provide a neater finish.
Often found in assemblies to help prevent loosening, but they can also be found in electrical connections such as battery terminals.
Available in both metric sizes and more, they can be in diameters of M3 onwards.
Internal shakeproof washers available in a range of sizes and materials from Fastenright. Specials made to order.
Please contact us with your requirements to further your enquiry.
Technical Data and Available Sizes | |||
---|---|---|---|
Also available BA 10BA – 0BA and Fractional 1/8″ to 11/4″ | |||
Diameter | d | d2 | s1 |
M2 | 2.2 | 4.5 | 0.3 |
M2.5 | 2.7 | 5.5 | 0.4 |
M3 | 3.2 | 6.0 | 0.4 |
M3.5 | 3.7 | 7.0 | 0.5 |
M4 | 4.3 | 8.0 | 0.5 |
M5 | 5.3 | 10.0 | 0.6 |
M6 | 6.4 | 11.0 | 0.7 |
M7 | 7.4 | 12.5 | 0.8 |
M8 | 8.4 | 15.0 | 0.8 |
M10 | 10.5 | 18.0 | 0.9 |
M12 | 13.0 | 20.5 | 1.0 |
M14 | 15.0 | 24.0 | 1.0 |
M16 | 17.0 | 26.0 | 1.2 |
M18 | 19.0 | 30.0 | 1.4 |
M20 | 21.0 | 33.0 | 1.4 |
M22 | 23.0 | 36.0 | 1.5 |
M24 | 25.0 | 38.0 | 1.5 |
M27 | 28.0 | 44.0 | 1.6 |
M30 | 31.0 | 48.0 | 1.6 |