Next: Cage Nuts 
Prev: Knurled Shouldered Thumb Nuts (DIN 466) 
A Wing Nut is a nut with two large metallic wings on either side, allowing it to be easily tightened or removed by hand.
They are created to DIN 315 AF standard.
The elongated wings are designed to make the nut operable without the use of tools, and they can be used alongside Wing Screws to create fastenings that are easily adjustable from both sides.
As standard, these nuts are available in Stainless Steel as standard, with a number of coating options available – as well as special materials.
Available from M4 to M10, we can also provide specials for a specific application should it be required.
Non-standard sizes, materials and finishes are available to order as specials, including small volume manufacture, modifications and bespoke parts made to drawings. Minimum order quantities apply.
| Technical Data & Availability | |||||||||||||||
| Thread Diameter |
Wing Height H (mm) |
Wing Width E (mm) |
Nut Height M (mm) |
Outer Diameter OD (mm) |
Availability | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M3 | 8.6 | 17.6 | 2.9 | 8.0 |  |
||||||||||
| M4 | 8.6 | 17.6 | 2.9 | 8.0 | |
||||||||||
| M5 | 11.0 | 22.5 | 4.1 | 10.3 | |
||||||||||
| M6 | 13.6 | 27.8 | 5.1 | 12.7 | |
||||||||||
| M8 | 14.8 | 30.3 | 5.6 | 13.8 | |
||||||||||
| M10 | 17.3 | 36.2 | 6.8 | 16.5 | |
||||||||||
| M12 | 22.3 | 49.4 | 9.0 | 22.5 | |
||||||||||
| M14 | 30.8 | 52.7 | 10.0 | 26.0 | |
||||||||||
| M16 | 30.8 | 58.3 | 10.7 | 26.6 | |
||||||||||
| M20 | 31.2 | 66.5 | 12.2 | 29.3 | |
||||||||||
| = Available Size not listed? Please make an enquiry – we may be able to provide it. |
|||||||||||||||
