IN06 Insert nuts have a socket drive and feature a sealing collar. These steel inserts are designed only for manual insertion into softwoods and composite boards. They have a zinc coating to protect them from deterioration through corrosion. These die cast steel inserts have an outside thread which is left-handed, while the internal thread is right handed. The overall external diameter, including the sealing collar, is 15mm or 22mm. The diameter of the outside thread is of 10mm or 15.3mm and the length 16mm or 17mm. The internal thread diameter of the smaller insert is M6 while the larger size is available in two versions, one suitable for screws of M8 and the other for M10
Available in a range of sizes – see stock chart below for full specifications. Non standard sizes available to order.
|IN06 Insert Nut for Soft Wood
(WITH HEX DRIVE AND SEALING COLLAR, LEFT-HAND OUTSIDE THREAD AND RIGHT-HAND INTERNAL THREAD)
|D1||D||L||d||SW||Pilot Hole||Steel zinc plated|
|15||10||16||M 6||6||8.0 – 8.5|
|22||15.3||17||M 8||10||12.5 – 13.5|
|22||15.3||17||M 10||10||12.5 – 13.5|