Header fastener image

Security Fasteners and General Fixings from Stock and to order

Click Now for a Quote

Call +44(0) 1902 457734

Twitter Icon Facebook Icon LinkedIn Icon Skype Icon

KM Locking Nuts

SKU: SL20 Categories: ,

KM Locking Nuts are available from stock in diameters from M10 to M200. Other sizes are available to order.
Locking nut diagram image

TECHNICAL INFORMATION (mm)
Ref d1 d2 d3 h b t
KM 0 M10 x 0.75 18 13.5 4 3 2.0
KM 1 M12 x 1.00 22 17.0 4 3 2.0
KM 2 M15 x 1.00 25 21.0 5 4 2.0
KM 3 M17 x 1.00  28 24.0 5 4 2.0
KM 4 M20 x 1.00 32 26.0 6 4 2.0
KM 5 M25 x 1.50 38 32.0 7 5 2.0
KM 6 M30 x 1.50 45 38.0 7 5 2.0
KM 7 M35 x 1.50 52 44.0 8 5 2.0
KM 8 M40 x 1.50 58 50.0 9 6 2.5
KM 9 M45 x 1.50 65 56.0 10 6 2.5
KM 10 M50 x 1.50 70 61.0 11 6 2.5
KM 11 M55 x 2.00 75 67.0 11 7 3.0
KM 12 M60 x 2.00 80 73.0 11 7 3.0
KM 13 M65 x 2.00 85 79.0 12 7 3.0
KM 14 M70 x 2.00 92 85.0 12 8 3.5
KM 15 M75 x 2.00 98 90.0 13 8 3.5
KM 16 M80 x 2.00 105 95.0 15 8 3.5
KM 17 M85 x 2.00 110 102.0 16 8 3.5
KM 18 M90 x 2.00 120 108.0 16 10 4.0
KM 19 M95 x 2.00 125 113.0 17 10 4.0
KM 20 M100 x 2.00 130 120.0 18 10 4.0
KM 21 M105 x 2.00 140 126.0 18 12 5.0
KM 22 M110 x 2.00 145 133.0 19 12 5.0
KM 23 M115 x 2.00 150 137.0 19 12 5.0
KM 24 M120 x 2.00 155 138.0 20 12 5.0
KM 25 M125 x 2.00 160 148.0 21 12 5.0
KM 26 M130 x 2.00 165 149.0 21 12 5.0
KM 27 M135 x 2.00 165 149.0 21 12 5.0
KM 28 M140 x 2.00 180 160.0 22 14 6.0
KM 29 M145 x 2.00 190 171.0 24 14 6.0
KM 30 M150 x 2.00 195 171.0 24 14 6.0
KM 31 M155 x 3.00 200 182.0 28 16 7.0
KM 32 M160 x 3.00 210 182.0 25 16 7.0
KM 33 M165 x 3.00 210 193.0 26 16 7.0
KM 34 M170 x 3.00 220 193.0 26 16 7.0
KM 36 M180 x 3.00 230 203.0 27 18 8.0
KM 38 M190 x 3.00 240 214.0 28 18 8.0
KM 40 M200 x 3.00 250 226.0 29 18 8.0

KM Locking nuts, often referred to as bearing nuts, shaft nuts or withdrawal nuts. are commonly used in conjunction with suitable tab washers to securely locate bearings and other components onto a shaft. They can also be utilized when mounting taper bore bearings onto shafts.

KM Locking nuts have four equally spaced slots machined into the outer diameter of the nut which enable the nut to be secured into position using the appropriate tab washer by bending the tab into the slots.