Micro Slotted Pan Screws are machine screws that are created to DIN standard 85A.
They feature a single slot in their head that allows them to be installed using a standard flat blade screwdriver.
It is generally not advised to use a power driver with a slotted drive as the driver tends to slip out and can cause damage to the surface it is being applied to.
Micro Slotted Pan Machine Screws are available from stock in mild steel, A2 and A4 stainless steel and brass with other materials available to order.
Sizes range from M1.6 to M3 as standard, but larger diameters are available.
Please contact us with your requirements to further your enquiry.
Micro Slotted Pan Screw – Din 85A |
||||
D1 | M1.6 | M2 | M2.5 | M3 |
D2(mm) | 3.2 | 4.0 |
5.0 |
6.0 |
K(mm) | 1.00 |
1.20 | 1.50 |
1.80 |
N | 0.60 |
0.60 | 0.60 | 0.70 |
T | 0.35 |
0.50 |
0.60 |
0.70 |
PITCH | 0.35 | 0.4 | 0.45 | 0.5 |
AVAILABLE SIZES | M1.6 | M2 | M2.5 | M3 |
3MM | Stock | Stock |
Stock | |
4MM | Stock | Stock | Stock | Stock |
5MM | Stock | Stock | Stock | Stock |
6MM | Stock | Stock | Stock | Stock |
8MM | Stock | Stock | Stock | Stock |
10MM | Stock | Stock | Stock | |
12MM | Stock | Stock | Stock | |
14MM | Stock |
Stock | Stock | |
16MM | Stock | Stock | Stock | |
18MM | Stock | Stock | Stock | |
20MM | Stock | Stock | Stock | |
22MM | Stock | Stock | ||
25MM | Stock | Stock | ||
28MM | Stock | Stock | ||
30MM | Stock | Stock |
||
35MM | Stock | Stock | ||
40MM | Stock | Stock | ||
45MM | Stock | Stock | ||
50MM | Stock | Stock | ||
60MM | Stock |