Thin-Walled Steel Insert for Plastic and Soft Wood (FasPlas IFP019)

Steel Inserts for Plastic and Soft Wood

These steel inserts have a circular drive and can be inserted manually or by employing a semi or fully automated technique.

• Thin walled and indicated for installation in soft woods, chipboard and plywood
• Wide external thread that runs the length of the insert
• External thread provides good resistance to twisting and pull-out
• Excellent conductors of electrical current and high tensile strength
• Long-term and reusable due to being hardy against corrosion

Brass Inserts with Circular Drive

These steel inserts have a circular drive and can be inserted manually or by employing a semi or fully automated technique. They are thin walled and indicated for installation in plastic, soft woods, chipboard and plywood. These threaded steel inserts have a full internal thread with sizes from M4 to M10 and are available in lengths from 8 to 20mm with diameters from 6.5 to 16mm. The wide external thread runs the length of the insert to provide good resistance to twisting and pull out. These steel inserts are excellent conductors of electrical current and have a high tensile strength. They are also hardy against corrosion so offering a long-term reusable thread.

8	8	M5	6.5 – 7.0	0.9
8	10	M5	6.5 – 7.0	1.2
8	12	M5	6.5 – 7.0	1.4
8	15	M5	6.5 – 7.0	1.8
9.3	12	M6	7.8 – 8.3	1.9
9.3	17	M6	7.8 – 8.3	3.1
9.3	20	M6	7.8 – 8.3	3.7
10	10	M6	8.0 – 8.5	2.0
10	12	M6	8.0 – 8.5	2.3
10	14	M6	8.0 – 8.5	2.8
10	15	M6	8.0 – 8.5	2.9
10	17	M6	8.0 – 8.5	3.3
10	18	M6	8.0 – 8.5	3.5
10	20	M6	8.0 – 8.5	3.9
12	10	M8	10.0 – 10.5	2.8
12	12	M8	10.0 – 10.5	3.3
14	10	M10x1	12.0 – 12.5	3.3
14	15	M10	12.0 – 12.5	4.5
14	18	M10	12.0 – 12.5	5.3
14	20	M10	12.0 – 12.5	6.0
14	23	M10	12.0 – 12.5	6.9
16	16	M10	12.5 – 13.5	7.4
16	18	M10	12.5 – 13.5	8.0
16	23	M10	12.5 – 13.5	10.5
16	36	M10	12.5 – 13.5	15.1