Covid-19 - Fastenright is open for business for all fastener and fixing enquiries. Orders are being processed and despatched as normal.

Header fastener image

Security Fasteners and General Fixings from Stock and to order

Click Now for a Quote

Call +44(0) 1902 457734

Twitter Icon Facebook Icon LinkedIn Icon Skype Icon

Titanium Nyloc Nuts (DIN 985)

Titanium Nyloc Nuts are torque prevailing nuts which use a plastic/nylon insert (hence the name nyloc) which is inserted towards the top of the nut. This reduces the inner diameter, which then deforms over the mating thread.

This captures the bolt or screw, therefore providing a locking feature – causing resistance or prevailing torque, which keeps the nut resistant to vibration and locked in position.

The threads of the screw or fastener do not cause damage to the plastic/nylon section, allowing the nut to be re-used. It will, however, deteriorate after persistent re-use.

An economic locking nut, Titanium Nyloc Nuts are ideal in applications where vibration or motion could loosen or undo the nut. They can also be used to assist in sealing the bolt thread against seepage of oil, water, petrol, paraffin and a range of other liquids.

Available in Grade 2 Titanium, and Grade 5 Titanium, in diameters from M1.2 to M56 as standard. Specials are available to be made to order.

Please contact us with your requirements to further your enquiry.

Nyloc diagram image

TECHNICAL INFORMATION
D1 -THREAD TYPE T – DIN 985 TYPE P – DIN 982
H M S H M S
M1.2 1.5 1.0 2.2
M1.4 1.5 1.0 2.2
M1.6 1.65 1.4 2.2
M2 3.0 1.8 4.0
M2.5 3.4 2.25 5.0
M3 3.6 2.4 5.5
M3.5 5.0 3.2 6.0
M4 4.0 2.5 7.0
M5 5.0 3.5 8.0 6.3 4.0 8.0
M6 6.0 4.5 10.0 8.0 5.0 10.0
M7 7.5 5.5 11.0 8.5 5.5 11.0
M8 8.0 6.0 13.0 9.5 6.5 13.0
M10 10.0 7.5 17.0 11.5 8.0 17.0
M12 12.0 8.5 19.0 14.0 10.0 19.0
M14 14.0 11.5 22.0 16.0 11.0 22.0
M16 16.0 12.5 24.0 18.0 13.0 24.0
M18 18.0 14.0 27.0 20.0 15.0 27.0
M20 20.0 15.0 30.0 22.0 16.0 30.0
M22 22.0 16.0 32.0 25.0 18.0 32.0
M24 24.0 18.0 36.0 28.0 19.0 36.0
M27 27.0 21.0 41.0 30.5 23.0 41.0
M30 30.0 23.0 46.0 35.0 27.0 46.0
M33 33.0 25.0 50.0
M36 36.0 27.0 55.0
M39 39.0 30.0 60.0
M42 42.0 33.0 65.0
M45 45.0 35.0 70.0
M48 48.0 38.0 75.0
M52 52.0 42.0 80.0
M56 56.0 45.0 85.0

 

Please make full use of our Fastener rotation by left-clicking and dragging to rotate, and using the mouse wheel to zoom in or out.
For display only, visuals may differ. Not displaying properly? Please refresh the page.