Header fastener image

Security Fasteners and General Fixings from Stock and to order

Click Now for a Quote

Call +44(0) 1902 457734

Twitter Icon Facebook Icon LinkedIn Icon Skype Icon

IN02 Insert Nut for Hard Wood

SKU: IN02 Category:

IN02 insert nuts for hard wood feature an unthreaded lead to make assembly easier. They are ideal for use in hardwoods and MDF board but can also be appropriate for some soft woods, such as chipboard and plywood.

These inserts are available in steel with or without zinc plating, as well as brass and stainless steel. They are available in diameters from 8mm to 22mm.with a standardised internal thread between M4 and M12 and are RoHS compliant. Assembly can be manual, semi or fully automated using the appropriate hex drive of sizes between 4-mm and 12-mm.

Note: A pilot hole slightly smaller that the insert’s diameter should be predrilled.

Available in a range of sizes – see stock chart below for full specifications. Non standard sizes available to order.

IN02 Insert Nut for Hard Wood technical drawing

IN02 Insert Nut for Hard Wood
D L d SW Pilot Hole Steel plain Steel zinc plated Brass plain Steel stainless 1.4305 Steel stainless 1.4571
8 8 M 4 4 7.0 – 7.5
8 10 M 4 4 7.0 – 7.5
8 12 M 4 4 7.0 – 7.5
10 8 M 5 5 8.0 – 8.5
10 10 M 5 5 8.0 – 8.5
10 12 M 5 5 8.0 – 8.5
10 14 M 5 5 8.0 – 8.5
12 10 M 6 6 10.0 – 10.5
12 12 M 6 6 10.0 – 10.5
12 15 M 6 6 10.0 – 10.5
12 18 M 6 6 10.0 – 10.5
12 20 M 6 6 10.0 – 10.5
12 23 M 6 6 10.0 – 10.5
12 25 M 6 6 10.0 – 10.5
14 12 M 8 8 12.0 – 12.5
14 15 M 8 8 12.0 – 12.5
14 18 M 8 8 12.0 – 12.5
14 30 M 8 8 12.0 – 12.5
16 14 M 8 8 14.0 – 14.5
16 18 M 8 8 14.0 – 14.5
16 23 M 8 8 14.0 – 14.5
16 30 M 8 8 14.0 – 14.5
18.5 15 M 10 10 16.0 – 16.5
18.5 20 M 10 10 16.0 – 16.5
18.5 25 M 10 10 16.0 – 16.5
18.5 30 M 10 10 16.0 – 16.5
18.5 40 M 10 10 16.0 – 16.5
22 30 M 12 12 20.0
22 40 M 12 12 20.0
= AVAILABLE