Micro Hexagon Full Nuts are created to DIN standard 934.
They are commonly used with any male fastener with the same thread diameter and pitch and used to mate a stack or single part together. Installed or removed using standard spanners or socket tools.
The tensile strength of the Micro Hexagon Full Nut should not be more than that of the bolt or mating component as this could cause the threads to strip.
Available from stock in steel grade 8, A2 and A4 stainless steel and brass – other materials are available to order.
Thread diameters range from M1 to M3 as standard. Special sizes are available to order.
Please contact us with your requirements to further your enquiry.
Micro Hex Full Nut Din 934 Available Sizes & Materials | ||||
D1(mm) | S(mm) | E(mm) | M(mm) | Material |
M1 Hex Fullnut Din 934 | 2.5 | 2.71 | 0.8 | Steel / Stainless / Brass |
M1.2 Hex Fullnut Din 934 | 3.0 | 3.28 | 1.0 | Steel / Stainless / Brass |
M1.4 Hex Fullnut Din 934 | 3.0 | 3.28 | 1.2 | Steel / Stainless / Brass |
M1.6 Hex Fullnut Din 934 | 3.2 | 3.41 | 1.3 | Steel / Stainless / Brass |
M2 Hex Fullnut Din 934 | 4.0 | 4.32 | 1.6 | Steel / Stainless / Brass |
M2.3 Hex Fullnut Din 934 | 4.5 | 4.88 | 1.8 | Steel / Stainless / Brass |
M2.5 Hex Fullnut Din 934 | 5.0 | 5.45 | 2.0 | Steel / Stainless / Brass |
M2.6 Hex Fullnut Din 934 | 5.0 | 5.45 | 2.0 | Steel / Stainless / Brass |
M3 Hex Fullnut Din 934 | 5.5 | 6.01 | 2.4 | Steel / Stainless / Brass |