Header fastener image

Security Fasteners and General Fixings from Stock and to order

Click Now for a Quote

Call +44(0) 1902 457734

Twitter Icon Facebook Icon LinkedIn Icon Skype Icon

6 Lobe Pin TX Countersunk Security Sleeve Anchor

6 Lobe Pin TX Countersunk Security Sleeve Anchor Stock Sizes

  • Countersunk head security sleeve anchor
  • Ideal for construction industry
  • Vandal resistant
  • Reusable 2 way drive
  • Special driver bits required
  • Available in A2 stainless steel

All stocked sizes are listed below. 6 Lobe Pin TX Countersunk Security Sleeve Anchors are available in non-standard sizes to order.

Size Drill Hole Diameter (mm) Maximum Fixture Thickness (mm) Maximum Hole Depth (mm) Recommended Tightening Torque (n.m.) Safe Static Loads (kn)
Tension Shear
M6 X 50 8 10 37 7 1.2 2.3
M8 X 55 10 10 45 15 2.2 7.5
M8 X 80 10 25 45 15 2.2 7.5
M10 X 60 12 10 52 31 3.5 9.6
M10 X 80 12 25 52 31 3.5 9.6

Description: 6 Lobe Pin TX Countersunk Security Sleeve Anchors

6 Lobe Pin TX Countersunk Security Sleeve Anchors are supplied in stainless steel. The 6 lobe drive require a special driver bit and offers a medium level of security. Fixing is quite straightforward, just drill a suitably sized hole and clear away any dust. Insert the anchor and, as the screw is tightened, the anchor sleeve will expand to ensure a tight fit. Ideal for concrete or brick, the fixing can be removed if maintenance is required.

Special Pin TX Security Screws can be made to order including modifications and custom parts to drawings.

Advantages of 6 Lobe Pin TX Screws

  • Reduced slippage (cam-out) compared to other drives like Philips or 2-hole
  • Better torque when compared to conventional screw heads
  • Less risk of damage to the drive tip, screw head or the application, making it cost effective to install and remove

6 lobe Pin TX Security screws offer medium security resistance against vandals and thieves at a relatively low cost.

Within the industry Pin TX security screws are also referred to by other names including Star Pin Drive, Tamper Torx ®, Torx® Pin, Resistorx® and 6 Lobe Pin.

Tamper Resistant 6 lobe Pin TX machine screws can be used with Pin TX Barrel Nuts, Security Wave Nuts, Shear Nuts, Kinmar Reusable Nuts, Kinmar Permanent Nuts, 4-Hole Nuts or for added security.

Please see the stock size chart and technical information for all available sizes.

Any non-listed sizes or materials can be manufactured to order, please call us or use the “Make an Enquiry” button above.

6 Lobe Pin TX Countersunk Security Sleeve Anchor